Why Mi-Horn?
Mi-Horn soundwave guide system.
EBAY (ID: aalleexxyy) -- Positive feedback: 100%
The most important component.

A) 2 ch soundwave B) 5 ch soundwave C) Mi-Horn soundwave
The sound travels 1000 feet/second in wave form. If the room has a typical home reverberation time of 0.6 seconds, the sound will travel 600 feet in 0.6 second, and a sound wave will ricochet about the room some 60 times before becoming essentially inaudible. That's why many systems sounds bright, ear hurting, veiled, colored, and boring.
A)The sound travels all directions. All walls, ceiling, and floor need sound absorbers.
B)The soundwaves from 5 HT loudspekaers generate so much reflection sounds without a room treatment. The room needs sound absorbers everywhere like a movie theater.
C)The initial sound from front loudspeakers travel only one direction that only a back wall needs the sound absorber.
David Smith, President and Chief
Engineer for Snell Acoustics said "the recording that you paid good money
for already has the sonic footprint of that large carefully designed performance
space. Your living room doesn't need to add its footprint on top of that.
In truth, your living room needs to absorb as much sound as possible. It
needs to be acoustically dead."
Listen what's recorded! Not the room echo! The room out-weighs everything. A budget sound system in good room sounds better than the world class system in bad room. Mi-Horn soundwave guide system makes walls, floor, and ceiling disapper acoustically. Mi-Horn helps a room acoustically dead.
Listen the true sound of your current sound system without a room sound. Put your hands right above your ears (not behind) like Furby A and B while you are listening music.



A B Not like C
This cuts off the bounced sound from ceiling. This helps to hear the original sound from front loudspeakers. The soundstage should be natural, clean, musical, and simple. Just like live music!


Placing large paper boards (sketch book) on the top of speakers will stop the sound reaching to the ceiling. This helps to hear the original sound of your speakers. Try to live with it for few days. You and family will like the sound.
The sound of your system with Mi-Horn will be very similar to the sound from above methods. Mi-Horn will reduces the reflection sound from side walls and floor too. Also, Mi-Horn increases SPL. Mi-Horns are only 2 inches high, but Mi-Horn is more effective and accurate then any above methods. And looks great!
Preserving the original sound of loudspeakers

Traditional Horn Mi-Horn (Pat. Pend.)
Traditional(old) horn generates multiple bounced sounds inside horn. Bounced sounds are timely incoherent and tonally changed. However, Mi-Horn works like a that the original sound is delivered straight to the listener without 2nd bounce while unwanted sounds are absorbed by an inserted foam. Only Mi-Horn preserves and delivers the original sound to the listener.
Farther listening distance.

Without Mi-horn With Mi-horn
Almost loudspeakers in the market are near-field speakers. The speaker sounds better when a listener is closer. The sound becomes muddy, veiled, soft after 9 feet. Some likes soft an laid back sound for easy listening or background music. But the Home Theater sound should be clear, real, and powerful. The HT needs more than 9 feet listening distance. The Mi-Horn sound is not laid back. The movie sound track will jump at you as if "they are in your room". Mi-Horn brings a true movie theater excitement to your home. Mi-Horn is detailed, clearer, defined, musical, more body, and never harsh or boring.
Clearer voice in low volume.

The complaint from neightbor due to loud HT sound is a common problem. People raises the volume to hear dialogues at night. Raising the volume increases low frequencies more than high frequnceies. Only Mi-Horn delivers clear and defined dialogue even in low volume. If you need movie theater sound in your HT, only Mi-Horn bring the best movie theater sound to your home.
Mi-Horn is the Voice of Theatre.
Frequency balance
Without Mi-horn With Mi-horn
The powered sub-woofer produces plenty of low frequency. The HT and music sound needs a balance and harmony between low, mid, and high frequencies. With Mi-Horn, the bass really comes alive and articulate. Also, higher frequencies sounds more vibrant, palpable, and smoother. Every sub-woofer deserves Mi-Horn.
Save $$$
Do you believe the sound from $300 Kenwood VR-2080 receiver with Mi-Rollers, $100 Panasonic A-120 with Mi-Rollers, $200 powered sub., and $300 budget speakers with Mi-Horns beats a $35,000 system combination of Theta CDP. Mark Levinson amps, Avalon Eclipse speakers, and Transparent Ultra cables with many exotic tweaks and accessories?
Mi-Horn is SUPER-END beyond Hi-end audio.
The good sound room needs to control the sound reflection. The expensive and ugly sound absorbers and diffusers are hard to install without the guarantee of improvement.
Are you willing to do this to your room? There is no guarantee that you'll like the sound of it. Can you refund or redo? Take a wild guess.
"Before you spend $$$$$ upgrade,
try Mi-Horn for $$ at no risk"

** Are you listening same sound everyday? Do you want a separate audio only system and HT sound system? Mi-Horn is convertible. Installation and removing is easy in seconds. You can have all around great sounds from a system. (jazz, chamber music, orchestra, vocal, HT) It's like having a 2nd system.
Interior
The HT or High-end sound systems should not only please our ears, but also, our eyes. A group of painting artists and interior specialists selected colors of Mi-Horn in making. "Mi-Horn is wife friendly." Mi-Horn will blend with your current speakers beautifully and is interchangeable that anyone can snap on and off the different color horns in seconds.
Mi-horn is made with high quality Poly-Carbonate.(PC) PC is used to make optical glasses and many applications require smooth surfaces, consistency, and hard composition.

Woofer Mi-Horn.
Controlling high frequency is easy and cheap. M&K, Avalon, Burmester, Triangle, Imager Ring(a doughnut shape sponge around a tweeter) and many companies have been controlling loudspeakers' high frequency. Mi-Horn is just 10 times more effective and accurate.
Controlling mid and low frequencies is very hard after the sound left the speaker driver with the dispersive character. Woofer Mi-Horn works at the mouth of the speaker driver. Mi-Horn gives you the tight and articulate original sound of woofers. All real musical emotions are in the mid/low frequencies.
Almost small woofers (4" - 8") on your loudspeakers handle relatively high frequencies up to 3300 hz. Woofer Mi-Horn is very effective for frequency range of 400hz - 3000hz to guide soundwaves. Also, 8" Mi-Horn is effective for very low frequecy that no other bass control tool can achieve at this cost.
"Trust your ears! Hear for yourself."
Mi-horn and Mi-Roller are developed with many years of tests and experience. Do little adventure in sound! Mi-Horn will deliver everything you want from your audio and HT system.
Happy listening!
Visit Installation for 8 easy ways to install.